UPGRADE FOR TRANSPORT VEHICLE (TOWING SERVICE) S SLIDING PLATFORM KP 30

• dimensions of the sliding portion of the platform approx 6,000 x 2,400 mm
• side fence of round steel pipe of 150 mm
• The entire base is sliding and tilting down to the ground by a hydraulic
• Manure maximum angle of 10-140
• Front protective fence
• management base angle and slide - handles the manifold
• auxiliary hydraulic stabilizers
• Mounting on the rear suspension
• allows the car's' landfill
• hydraulic management - manually
• capacity based on approximately 4,000 kg
• hydraulic winch WARN Series 9
• a traction force on the first coil 4.100 kg
• steel cable diameter Ø 11 mm, length 25 m Hook
• towing speed approx 9.5 to 13.5 m / min
• radio remote controls
• Lighting at the front protection website
• transverse displacement hydraulic winch
• mats to block the vehicle on the platform
• fenders
• Tool box girder
• Work searchlight on the fence behind the cab - Swivel
• 4 hoop for tying
• compact lighting fittings 1200 mm (two rotations, the central illuminated part of the inscription)
• Platform made of sheet steel
• construction and subchassis made of steel profiles
• Hydraulic control block on the right side
• side underrun protection according to CE standards
• hydraulic pump, oil tank and complete hydraulic installations
• blasting of steel parts and double coating in color according to customer
• attest

Option:

• installation of monitors and two cameras for the control of the foundations of this maneuver the vehicle
• Acoustic signaling when moving the vehicle backwards
• centrally located lifting crane extraction, power lifting to 3.5 m 2000 kg to 5.5 kg m-1200, the pulley at the top of the crane, raise the maximum angle of 450
• hook - the ball - at the rear
• additional tool chest
• Water canister 10 l with holder
• Additional swivel reflector, on the fence
• 4 PE belts with pre-tensioners for securing cargo
• Remote radio management of the entire platform, with 4 functions
• traction lever
• Holder motorcycle with the belt on the basis of
• Hydraulic towing fork (sand)
• 12 V socket at the end of the chassis
• Additional Tackle
• protective cover for anchor
• a special cover, elastic, intended to cover the vehicle on the platform, with the anchor points on the platform and with elastic tensioners

Note: The options telescopic crane, traction hydraulic forks or a combination is determined for each vehicle, in principle, a minimum total weight of the vehicle at least 7,500 kg.

Our partners

Hidraulika Kurelja d.o.o.

za proizvodnju i servis specijalnih hidrauličnih konstrukcija i opreme, unutrašnju i spoljnu trgovinu i zastupanje

Direktor
Krstić Sreten, dipl.pravnik
Mob: 062/287-202
Tel: 034/333-171
E-mail: direktor@hkproleter.com