• For rigid chassis total weight of 5,000 kg or more (single cabin 1 + 1 dual rear wheels), wheelbase 3,750 mm, driving the vehicle category C
• Number 2 axle truck chassis
• Type of hydraulic platforms - telescopic
• Working height 21.0 m Platform
• The maximum lateral reach of up to 11.6 m with the ALM system
• The maximum lateral reach of 200 kg in the labor baskets to 8.0 m with the ALM system
• ALM system: automatic torque limiting (gives automatic lateral reach of depending on the work load in the rack)
• Drive the platform with hydraulic PTO transmission from the vehicle
• Management platform electro-hydraulic, proportionally, from the basket of aerial platforms from the ground, additional manual operation
• Safety standards according to CE standards
- the inability of management if the stabilizers are not drawn
- the inability of management if the stabilizers are not supported on the ground
- the inability of management stabilizers if the linkage is raised
- the sound signals in border positions
• Platform width 2,100 mm Vehicle
• Platform height about 2,800 mm (depending on the type of chassis)
• Platform height of the vehicle chassis about 2.570 mm (depending on the type of chassis)
• Platform length 5,200 mm
• The length of the landing vehicle approximately 2.760 mm
• Weight upgrade about 2,000 kg
• The range of stabilizers in the working position a maximum of 3,200 mm
• Working Basket of polyester capacity 200 kg
• Turning the dome indefinitely
• Degree of protection IP 65 electrical equipment
• Sandblasting and double coating subchassis colored truck, color platform according to customer
• Lateral underrun protection in accordance with CE standards
• The mudguards on the rear wheels
• Electrical
• Outline bright
• Certificate Protection at Work platform
• Verification of the complete vehicle
